The “Novita Super” provides concentrated force to withstand heavy and even the most difficult of loads.

The cutting performance is 10x greater than that of the Novita Standard version.

Particularly handy and lightweight machine for cutting all types of material in layers up to approx. 8 mm high, depending on the material.

Particularly suitable for needled felt, Skai, branded films, soft leather and upholstery cover materials. The lubricator reduces friction between the blade and the counter blade, enabling laminated goods to be cut.

Cutting machine for template and pattern making, cutting single layers, re-cutting defectives parts, straight cutting true to form, light load (outer wear materials, knitted goods and knitwear, curtain, upholstery and decoration fabrics etc.).

The blade protection in signal color can be adjusted easily and infinitely and does not constrict the visibility. The actuating lever for the grinding device is well shaped, so that the blade can be re-sharpened with one hand even during cutting. Handling and guidance of the machine is easy and balanced.

The Novita Jet is a modified version of the compressed air operated Novita Standard. It provides ease of use and increased performance everywhere where no electrical connection is possible for saftey reasons, e.g. in wet areas.

Untiring and reliable just like all Kuris‘ NOVITA cutting machines.

The Novita Jet is driven by compressed air. Therefore every saftey risk is eliminated (overload and the electric motor burn out).

The motor cannot overheat even at a constant output and capacity overload.

The outlet air is evacuated to the rear through a double-walled tube – inner tube for supply air; outer tube for discharged air and released into the atmosphere far away from where the cutter is working.

It therefore no longer presents a disruption to anyone, either as a result of draughts (air swirls, cold effect, circulating fluff) or even by whistling.

The lubricator reduces friction between the blade and the counter blade, enabling laminated materials to be cut.

A particularly convenient and lightweight machine for cutting all kinds of textiles for layers up to approx. 25 mm high, depending on the type of material.

The fortified „Power“ versions particularly suitable for jeans, leather and rigid fabrics as well as industrial fabrics. The lubricator reduces friction between the blade and the counter blade, enabling laminated goods to be cut.

With the BOM 101 series of electric handheld cutters, the cutting effect is produced by a four-arc or six-arc blade in conjunction with a sprung-loaded adjacent counter blade.

This cutting principle enables good cutting performance at relatively low blade speeds. Individual layers of the finest materials and layers of material up to a cutting hight of 27 mm can be cut equally well.

High traction force thanks to a robust motor with a high power margin. Optimal gear mecha-nism made from a special alloy with excellent operating efficiency and simple maintenance.

Practically maintenance-free thanks to a special seal. Highest per-formance and service life due to very low heat generation in the motor and gears.
Not susceptible to contaminants, threads and fluff thanks to the special develop-ment and construction of the support and gear mechanism housing.

Light handling and handy machine controls in all cutting positions thanks to the „bone grip“. Grinding device very easy to operate thanks to the ideal configuration of the operating element. Optimal view of the workpiece thanks to the oval shape of the housing. Very low running noise. Quick blade change thanks to easy and very accessible blade fixing.

KRS 550 with rotating blade

1. For cutting all kinds and designs of textile materials.
2. Particularly suitable for cutting knitwear and knitted goods and quilted materials that tend to fray easily or produce fluff.

KRS 550 with four-arc blade and counter blade, for cutting

1. synthetic material that tend to be over a certain height for bonding cut edges.
2. plastic materials (Skai, branded films, etc.).
3. laminated flooring.
4. synthetic rubber interwoven materials (also rubber or soft rubber up to a certain height)

The KRS 550 model of the Kuris cutting machines can be supplied as a rotating blade or a four-arc machine with counter blade. It is possible to convert a rotating blade machine to a four-arc blade machine or vice versa using an appropriate unit.

The KRS 550 can be fitted with a blade damping device to prevent the blade from becoming encrusted with cutting residues. A teflon-coated blade is recommended for cutting particularly critical material.